Customization: | Available |
---|---|
Type: | Wireless |
Network Site: | Intermediate Node Routers |
Still deciding? Get samples of US$ 10000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Hua wei NetEngine40E Universal Service Router (NE40E)
NE40E-X8(02350REJ CR5P08BASA75):
Basic Configuration (Including NE40E-X8 Chassis, 2+1 Redundant 200G SRU/SFU,4 AC Power, without Software Charge and Document)
Features | Description |
Powerful Service Support | |
Port capability | The NE40E supports various interface types (E1, POS, CPOS, FE, GE, 10GE-LAN/WAN, 25GE, 40GE, 50GE, and 100GE) and high-density fixed ports to provide access and aggregation WAN services as well as Ethernet multi-service transmission platform (MSTP) aggregation services, satisfying various service requirements. Support dedicated interface for out-of-band management 10/100/1000 and RJ-45 interface for time synchronization. |
Routing | RIP, RIPng, OSPF, OSPFV3, IS-IS, IS-ISV6, BGP, BGPv6, Static routing, IPv4 Multicast, IPv6 Multicast, Multicast static, etc |
IPv4 | TCP/IP, for example, ICMP, IP, TCP, UDP, Socket (TCP/UDP/RAW IP), ARP Static DNS, DNS Client ,FTP Server, FTP Client ,TFTP Client, DHCP Relay ,DHCP Server ,Ping ,Tracert ,NQA ,IP policy-based routing, Forwarding next hop based on traffic IP policy-based route load balancing The QinQ interface (QinQ termination and dot1q termination) supports IPv4 load balancing. Enabling and disabling the rapid ping reply function based on interface boards Forcible fragmentation for packets with length greater than MTU and DF enabled MPLS-in-UDP tunnel egress PIM Multicast |
IPv6 | IPv6(ND),Path MTU (PMTU),TCP6, Ping IPv6, Tracert IPv6, Socket IPv6, DHCPv6 Relay, Static IPv6 DNS, TFTP IPv6 Client,IP policy-based routing, IPv6 ND fast reply,PIM Multicast |
L2VPN | PWE3/VLL,VPLS,EVPN,EVPN L3VPN,VxLAN,L2TP |
L3VPN | CE routers can access the L3VPN through L3 interfaces. MP-BGP, RSVP-TE P2MP Support static routes between CE and PE, BGP, RIP, OSPF and ISIS Inter-AS VPN, including RFC2547bis option A. Inter-AS VPN, including RFC2547bis option B Inter-AS VPN, including RFC2547bis option C NG-MVPN IPv6 VPN HoVPN Seamless MPLS BGP LSP entropy label Redirect to VPN L3VPN PIPE/Uniform mode L3VPN Statistics |
SRv6 | SRv6-BE,SRv6 Policy,SRv6 egress protection |
VAS | BNG/BRAS,NAT/CGN,IPSec,MACSec |
Clock | Physical layer synchronization,1588v2 Optional support of ITU-T G8273.2 Class C |
OAM | iFIT IPFPM NQA TWAMP BFD MPLS OAM MPLS-TP OAM VRRP Ethernet OAM 802.3ah Y1731 Ethernet LPT Bit-error-triggered protection switching |
QoS | QPPB,Differ-Serv,HQoS,Redirection |
Item | NE40E-X3 | NE40E-X8 | NE40E-X16 | NE40E-X3A | NE40E-X8A | NE40E-X16A | ||||||
Switching capacity | 1.08 Tbps | 7.08 Tbps (LPUF- 240/LPUI-240) |
12.58 Tbps (LPUF- 240/LPUI-240) |
2.76 Tbps | l 25.16 Tbps (LPUI-1T) l 51.2 Tbps (LPUI-2T) |
l 50.32 Tbps (LPUI-1T) l 81.92 Tbps (LPUI-2T) |
||||||
Forwarding performance | l 105 Mpps (LPUF-51) l 360 Mpps (LPUF-120) |
2800 Mpps (LPUF-240) | 5600 Mpps (LPUF-240) | 900 Mpps (LPUF-200) | 2800 Mpps (LPUF-240) | 5600 Mpps (LPUF-240) | ||||||
Number of slots supported | 5 | 11 | 22 | 5 | 12 | 22 | ||||||
Number of interface board slots supported Redundant MPUs | 1:1 | |||||||||||
Redundant Switch fabrics | N/A | 2+1 | 3+1 | N/A | 3+1 | 3+1 | ||||||
MTBF | 27.44 years | 21.91 years | 21.66 years | 22.85 years | 22.32 years | 22.33 years | ||||||
MTTR | 0.5 hours | |||||||||||
Availability | 0.99999792 | 0.999997395 | 0.999997365 | 0.999997502 | 0.999997443 | 0.9999974444 | ||||||
Dimensions (H x W x D) | l DC: (4 U) 175 mm x442 mm x650 mm (6.89 in. x 17.40 in. x25.59 in.) l AC: (5 U) 220 mm x442 mm x650 mm (8.66 in. x17.40 in. x 25.59 in.) |
l (14 U) 620mm x 442 mm x 650mm (24.41 in. x 17.40in. x 25.59 in.)(Chassis main body) l (14 U) 620mm x 442 mm x 770mm (24.41 in. x 17.40in. x 30.31 in.)(Dimens ions of the chassis body together with cable trays and front and back attachment s) |
l (32 U) 1420mm x 442 mm x 650mm (55.91 in. x 17.40in. x 25.59 in.) (Chassis main body) l (32 U) 1420mm x 442 mm x 770mm (55.91 in. x 17.40in. x 30.31 in.) (Dimension s of the chassis body together with cable trays and front and back attachment s) |
l (6 U) 264mm x 442mm x 710mm (10.39in. x 17.40 in. x 27.95 in.) (Chassis main body) l DC: (6 U) 264 mm x442 mm x758 mm (10.39 in. x17.40 in. x29.84 in.) (Dimension s of the chassis body together with cable trays and front and back attachment s) l AC: (6 U) 264 mm x442 mm x770 mm (10.39 in. x17.40 in. x30.31 in.) (Dimension s of the chassis body together with cable trays and front and back attachment s) |
l (21 U) 930mm x 442mm x 650 mm (36.61in. x 17.40in. x 25.59 in.) (Chassis main body) l (21 U) 930mm x 442mm x 750 mm (36.61in. x 17.40in. x 29.53 in.) (Dimension s of the chassis body together with cable trays and front and back attachment s) l [2T bundle](21U) 930 mmx 442 mm x 941 mm (36.61 in. x17.40 in. x37.05 in.) (Dimension s of the chassis body together with cable trays and front and back attachment s and noise reduction module) |
l (40 U) 1778mm x 442 mm x 650mm (70.00in. x 17.40in. x 25.59 in.) (Chassis main body) l (40 U) 1778mm x 442mm x 750mm (70.00in. x 17.40 in. x 29.53 in.) (Dimension s of the chassis body together with cable trays and front and back attachments) l [2T bundle](40 U) 1778mm x 442mm x 946 mm (70.00in. x 17.40 in. x 37.24 in.) (Dimension s of the chassis body together with cable trays and front and back attachment s) |
||||||
Weight (empty) | l DC: 12 kg (26.46 lb) l AC: 20 kg (44.1 lb) |
25.8 kg (56.89 lb) (without filler panels) |
69.6 kg (153.47 lb) (without filler panels) |
26 kg (57.33 lb) |
l DC: 68.1 kg (150.16 lb) (without filler panels) l HVDC&AC: 63.7 kg(140.46 lb) (without filler panels) |
l DC: 120.5kg (265.7 lb) (without filler panels) l HVDC&AC: 111.7 kg(246.3 lb) (without filler panels) |
||||||
Weight (full configuration) | l DC: 42 kg (92.61 lb) l AC: 52 kg (114.66 lb) |
136 kg (299.88 lb) | 279 kg (615.2 lb) | l DC: 72.1 kg (158.98 lb) l AC: 74.7 kg (164.71 lb) |
l [1T bundle] DC:209 kg (460.85 lb) l [1T bundle]HVDC&AC:206.5 kg (455.33 lb) l [2T bundle]DC:242kg (533.51 lb) l [2T bundle]AC&HVDC:234.4kg(516.76 lb) |
l [1T bundle] DC:399.4 kg (880.68 lb) l [1T bundle] HVDC&AC:395.1 kg (871.2 lb) l [2T bundle] DC:461.3kg(1017.0 lb) l [2T bundle] HVDC&AC:453.3kg(999.34 lb) |
||||||
Cabinet installation standard | Can be installed in a standard 19"800 mm-deep cabinet. A Hua wei 2.2 m- high N68E cabinet is used by default. | Can be installed in a standard 19"800 mm-deep cabinet. A Hua wei 2.2 m- high N68E cabinet is used by default. | Can be installed in a standard 19"800 mm-deep cabinet. A Hua wei 2.2 m- high N68E cabinet is used by default. | Can be installed in a standard 19" 800 mm-deep cabinet. A Hua wei 2.2 m- high N68E cabinet is used by default. |
l Can be installed in a standard 19" 800mm-deep cabinet. A Hua wei 2.2 m-high N68E cabinet is used by default. l [2T bundle] Can be installed in a standard 19" 1000mm-deep cabinet,part number is 02115109( CR5B0N61 0E60) |
l Can be installed in a standard 19" 800 mm-deep cabinet. A Hua wei 2.2 m-high N68E cabinet is used by default. l [2T bundle] Can be installed in a standard 19" 1000mm-deep cabinet,part number is 02115109( CR5B0N61 0E60) |
||||||
Typical power consumption | l DC: 800 W (fully configured with LPUF- 51s) l AC: 950 W (fully configured with LPUF- 51s) l DC: 920 W (fully configured with LPUF- 120s) l AC: 1070 W (fully configured with LPUF- 120s) |
3220 W (fully configured with LPUF-240s) | 6210 W (fully configured with LPUF-240s) | 1120 W (fully configured with LPUF-200s) | l 4110 W (fully configured with LPUF- 240s) l 4770 W (fully configured with LPUF- 480s) l 6520 W (fully configured with LPUI- 1Ts) l 11100 W (fully configured with LPUI- 2Ts) |
l 7720 W (fully configured with LPUF- 240s) l 9040 W (fully configured with LPUF- 480s) l 12390 W (fully configured with LPUI- 1Ts) l 22450 W(fully configured with LPUI- 2Ts) |
||||||
Typical heat dissipation | l DC: 2595.5 BTU/hour (fully configured with LPUF- 51s) l AC: 3082.2 BTU/hour (fully configured with LPUF- 51s) l DC: 2984.9 BTU/hour (fully configured with LPUF- 120s) l AC: 3471.5 BTU/hour (fully configured with LPUF- 120s) |
10447 BTU/hour (fully configured with LPUF-240s) |
20147.9 BTU/hour (fully configured with LPUF-240s) |
3633.8 BTU/hour (fully configured with LPUF-200s) |
l 13334.6 BTU/hour (fully configured with LPUF- 240s) l 15475.9 BTU/hour (fully configured with LPUF- 480s) l 21153.6 BTU/hour (fully configured with LPUI- 1Ts) l 36013.1 BTU/hour (fully configured with LPUI- 2Ts) |
l 25046.9 BTU/hour (fully configured with LPUF- 240s) l 29329.6 BTU/hour (fully configured with LPUF- 480s) l 40198.4 BTU/hour (fully configured with LPUI- 1Ts) l 72837.2 BTU/hour (fully configured with LPUI- 2Ts) |
||||||
DC input voltage | l input voltage range : -38.4 V to -72 V l input rated voltage: - 48 V/ -60 V |
l input voltage range: -38.4 V to -72 V l input rated voltage: - 48 V/ -60 V |
l input voltage range: -38.4 V to -72 V l input rated voltage: - 48 V/ -60 V |
l input voltage range: - 40 V to -72 V l input rated voltage: - 48 V/ -60 V |
l input voltage range: - 40 V to -72 V l input rated voltage: - 48 V/ -60 V |
l input voltage range: - 40 V to -72 V l input rated voltage: -48 V/-60 V |
||||||
AC input voltage | l input voltage range: 180 V to 264 V l input rated voltage:200 V to 240 V |
|||||||||||
Redundant powers | 1+1 | 2+2 | 4+4 | 1+1 | l [1T bundle] DC: 5+1 l [1T bundle] HVDC&AC: 4+1 l [2T bundle] DC: 7+1 l [2T bundle] HVDC&AC: 5+1 |
l [1T bundle] DC: 9+1 l [1T bundle] HVDC&AC: 7+1 l [2T bundle] DC: 12+1 l [2T bundle] HVDC&AC: 9+1 |
||||||
Redundant fans | Support for proper fan operation in case of a single fan failure for a short period at 40°C (104°F) | l 2 assemblies l Support for proper fan operation in case of a single fan failure for a short period at 40°C (104°F) |
l 2 partitions l 2 assemblies/ partition, each partition in support for proper fan operation in case of a single fan failure for a short period at 40°C (104°F) |
Support for proper fan operation in case of a single fan failure for a short period at 40°C (104°F) | l [1T bundle] 3 assemblies in support for proper fan operation in case of a single fan failure for a short period at 40°C (104°F) l [2T bundle] 3 assemblies in support for proper fan operation in case of a single fan failure for a short period at 40°C (104°F) |
l [1T bundle] 2 partitions; 3 assemblies/ partition; each partition in support for proper fan operation in case of a single fan failure for a short period at 40°C (104°F) l [2T bundle] 2 partitions; 3 assemblies/ partition; each partition in support for proper fan operation in case of a single fan failure for a short period at 40°C (104°F) |
||||||
Airflow | ||||||||||||
Operating temperature | l Long-term: 0°C to 45°C (32°F to 113°F) l Short-term:-5°C to +55°C (23°F to131°F) l Remark:Restriction on the temperatur e variation rate: 30°C/hour (86°F/h) |
|||||||||||
Storage temperature | -40°C to +70°C (-40°F to +158°F) | |||||||||||
Relative operating humidity | l Long term: 5% to 85% RH, non-condensing l Short term: 5% to 95% RH, non- condensing |
|||||||||||
Relative storage humidity | 5% to 95% RH,non- condensing | |||||||||||
Long-term operating altitude | <= 4000 m (13123.2 ft.) (For the altitude in the range of 1800 m to 4000 m [5905.44 ft. to 13123.2 ft.], the operating temperature of the NEU100 must decrease by 1°C [33.8°F] for every 220 m [721.78 ft.].) | |||||||||||
Storage altitude | Less than 5000m (16404 ft.) |
BOM Number | Order Name | Description |
2351596 | CR52-BKPE- 4U-DC | Integrated DC Chassis Components(NE40E- X3)-4U,Including Dual DC Power |
2355250 | CR5B0BKP037 0 | NE40E-X3 Integrated AC Chassis Components, (Including Dual AC Power) |
3055705 | CR5D0MPUD2 70 | Main Processing Unit D3(Including 4G Memory and 2G USB) |
2358577 | CR5P03BASD7 3 | NE40E-X3 Basic Configuration (Include NE40E- X3 Chassis,2 MPUs, 2 DC Power,without Software Charge and Document) |
2358578 | CR5P03BASA7 3 | NE40E-X3 Basic Configuration (Include NE40E- X3 Chassis,2 MPUs, 2 AC Power(2200W),without Software Charge and Document) |
The product is 100% genuine and has sufficient stock in stock;
Price discounts and fast delivery;
After sales service guarantee; Support sample and customization services.
Q: Are you a trading company or a manufacturer? Can I use our own logo and label?
A: We are a trading company that provides domestic and international trade services. We also provide OEM/OEM services.
Q: What are the guarantees for product quality?
A: We have professional engineers who test each piece of equipment before shipment to ensure that the shipped products are in good condition.
Q: How did you resolve a defective product when I received it?
A: We have professional personnel to help you solve the problem. If the product is defective, we usually offer you a return, refund, or replacement of the defective product.
Q: What is your payment method and delivery time?
A: We accept credit cards, wire transfers, PayPal, and other payment methods. We also support fast shipping within 72 hours.
Q: What is the MOQ and how long is the warranty period?
A: The minimum order quantity for normal products is 1, and the product warranty period is usually 1 year.