Hua Wei Optixstar C810 E AC Model E1 Ge Fe Stm Nce E2e Ethernet Oam Osu Wdm Optical Transmission Access Device Otn CPE

• Customization: Available
• Type: Fiber Transceiver
• Wiring Devices: Integrated Wiring
• Model NO.: OptiXstar C810 E (AC)
• Certification: CE, ISO, RoHS, GS
• Condition: New
• Model Number: Optixstar C810 E (AC)
• Dimensions (W × D ×h, mm): 44 mm X 320 mm X 220 mm
• Weight: 2.2 Kg
• Installation Mode: Installed on a Desk;Tmounted on a Wall; Cabinet
• Line-Side Capability: 2 X Otu1/Otu0 or 2 X Stm-16/Stm-4/Stm-1
• Maximum Upstream Bandwidth: 2 × 2.5 Gbit/S
• Power Supply: AC: 100 V to 240 V; DC: -48 V to -60 V
• Otn: 10g
• Function: Osu Qos Mpls-Tp Ethernet Oam Mpls-Tp
• Port Mtu: 64 Bytes to 9600 Bytes. The Default Value Is 9600
• Frequency (AC, Hz): 50/60
• Operating Temperature: -25 to +65
• Mttr (Mean Time to Repair): 1 Hour
• Architecture: Distinguished Architecture
• High Reliability: Secure Data Transmission
• Transport Package: Strong and Fast
• Specification: weight 2.2 Kg
• Trademark: HUA WEI
• Origin: Guangdong China

Product Description

 

Product Description

HUA WEI OptiXstar C810 E AC Model

 

Product Highlight

Small Volume, Low Power Consumption, and High Adaptability
☆    The OptiXstar C810 E is compact (H x W x D: 44 mm x 320 mm x 220 mm), energy-saving, and consumes ultra low power.
☆     It supports various installation modes, such as desktop-, wall-, and cabinet-mounted installation, enabling flexible deployment.
☆     It supports external power supply for 1+1 power supply protection.

Various Service Interfaces and Flexible Cross-Connection Grooming
☆     The OptiXstar C810 E supports E1, GE, FE, STM-4, and STM-1 interfaces to meet the access requirements of various services on the client side.
☆     It supports OSUflex cross-connection grooming and provides lower latency, more connections, and higher bandwidth utilization.
☆     It supports configuration of L1/L2 services for ports on the client side and upstream 2 x 2.5 Gbit/s bandwidth on the line side.

E2E Management Facilitates Agile Provisioning of Private Line Services
After the OptiXstar C810 E is powered on, it can be managed and controlled by NCE and implement E2E private line service provisioning within minutes.

 

Technical Specification

Hardware Specifications

Item		Specification
Dimensions (H x W x D)		44 mm x 320 mm x 220 mm
Weight		About 2.2 kg
Typical power consumption		30 W
Maximum power consumption		42 W
Circuit breaker specification		6:00 AM
Standard working voltage		l DC: -48 V to -60 V
		l AC: 100 V to 240 V
Power protection		Support optional external power supply module for power backup
Installation mode		l Installed on a desk
		l Mounted on a wall
		l Installed in an cabinet
Client-side capability		l E1-1 to E1-4: 4 x E1
		l FE/GE COMBO 5 to 8: 4 x GE/FE (electrical ports/ optical ports)
		l FE/GE/SDH 9 to 12: 4 x GE/FE/ STM-1/4 (optical ports)
		NOTE
		Ÿ Ports 5 to 8 support L2 services and each of ports 9 to 12 supports either L1 or L2 services.
		Ÿ Ports 5-8 are combo ports that support electrical or optical ports. Optical ports are incompatible with electrical modules. Ports 9 to 12 are compatible with GE electrical modules.
Line-side capability		2 x OTU1/OTU0 or 2 x STM-16/STM-4/STM-1
Maximum upstream bandwidth		2 × 2.5 Gbit/s
Service Mapping Path		l E1<->STM-16/STM-4/STM-1
		l E1<->STM-4/STM-16<->ODU0/ODU1<->OTU0/OTU1
		l FE/GE/STM-1/STM-4<->ODU0<->OTU1/OTU0
		l STM-1/STM-4<->STM-16/STM-4/STM-1
		l STM-1/STM-4<->STM-4/STM-16<->ODU0/ODU1<->OTU0/OTU1
		l ETH<->ODU0/ODU1<->OTU0/OTU1
		l ETH <-> OSUflex <-> ODU0/ODU1 <-> OTU0/OTU1
		l ETH<->STM-4/STM-16<->ODU0/ODU1<->OTU0/OTU1
		l ETH<->STM-16/STM-4/STM-1
Service cross-connect capacity	OTN	10G
		NOTE
		The service cross-connect capacity is shared by ODUk and OSUflex.
	SDH	Higher order: 12.5G; lower order: 5G
	Packet	8G
OTN functions	OSU	Supported
		NOTE
		l The OSU function requires license authorization.
		l The board supports a maximum of 32 OSUflex channels.
	Protection type	ODUk SNCP, OSUflex SNCP
	Physical-layer clock	Supported
	OTN performance monitoring	Supported
	Delay measurement	Supported
	ALS	Only supported by the client service mapping path
Packet functions	Protection type	LAG
	QoS	Ingress DS mapping and rate limitation on client-side ports
	Ethernet OAM	Supported (CC/LB/LT/LM/DM)
	MPLS-TP OAM	Not supported
	Delay measurement	Supported
	E-line	EPL/EVPL, including QinQ private line
		NOTE
		A maximum of 960 E-Line services can be configured in the packet + EoS service mapping path.
SDH functions	Protection type	VC-4 SNCP, VC-3 SNCP, VC-12 SNCP, 1+1 linear MSP
	Physical-layer clock	Supported
	PRBS	Supported
		NOTE
		When a VC4 cross-connect is configured, it is necessary to deactivate the cross-connect before performing the PRBS test.
EoS functions	EoS capacity	5G
	VCTRUNK specifications	Quantity: 8
		l Each VCTRUNK can be bound to a maximum of 8 x VC-4s, 24 x VC-3s, or 63 x VC-12s.
		l An NE supports a maximum of 32 x VC-4s, 48 x VC-3s, or 504 x VC-12s.
	Protection type	LCAS, LAG
	QoS	VCTRUNK shaping
	E-line	EPL/EVPL, including QinQ private line
		NOTE
		Ÿ  A maximum of 960 E-Line services can be configured in the packet + EoS service mapping path.
		Ÿ  For C-VLAN transparent transmission E-Line services of the EVPL type, the VLAN list can be configured, and each VLAN ID occupies one service.
Port MTU		64 bytes to 9600 bytes. The default value is 9600 bytes.
Port loopback		Supported
Power-off notice		Supported
NCE Controller		l Automatic rollout
		l E2E service provisioning
		l Automatic service provisioning
		l Bandwidth on demand (BoD)
		l Delay measurement
		l Latency map
Device operating temperature		-25°C to +65°C
		NOTE
		If the device runs at a temperature ranging from -5°C to +55°C, commercial optical modules can be used. If the device runs at a temperature ranging from  -25°C to +65°C, industrial optical modules must be used.
Device operating humidity		l Long term: 5% to 85%
		l Short term: 5% to 95%
		NOTE
		A short term refers to a maximum of 96 consecutive operating hours and a total operating time of no more than 15 days in a year.
Mean time to repair (MTTR)		1 hour^a
		NOTE
		The MTTR is related to the specific configuration of a device, including the average time for locating a fault on site, replacing a board, restarting the device, and recovering services. The traveling time is not included.
Mean time between failures (MTBF)		l AC: 90.18 years^a
		l DC: 90.15 years^a
a: The preceding parameter values are calculated based on the typical product configuration. The parameters vary according to the configuration module.

Product Display

Related product

Company Profile

 

Our Advantages

The product is 100% genuine and has sufficient stock in stock;

Price discounts and fast delivery;

After sales service guarantee; Support sample and customization services.

FAQ

Q: Are you a trading company or a manufacturer? Can I use our own logo and label?

A: We are a trading company that provides domestic and international trade services. We also provide OEM/OEM services.
 

Q: What are the guarantees for product quality?

A: We have professional engineers who test each piece of equipment before shipment to ensure that the shipped products are in good condition.

Q: How did you resolve a defective product when I received it?
A: We have professional personnel to help you solve the problem. If the product is defective, we usually offer you a return, refund, or replacement of the defective product.

Q: What is your payment method and delivery time?
A: We accept credit cards, wire transfers, PayPal, and other payment methods. We also support fast shipping within 72 hours.

Q: What is the MOQ and how long is the warranty period?
A: The minimum order quantity for normal products is 1, and the product warranty period is usually 1 year.