Optix Rtn 910A 02312kwh Sljmsite07 Basic Configuration Unit Ge RJ45 SFP DC Intermediate Frequency Board Idu Microwave Module Network Equipment

Product Description

Product Description

Split Type Long Range Microwave Transmission Equipment Assembly IDU RTN 900 Series(RTN 910A)

RTN 910A (code:02312KWH SLJMSITE07) Basic Configuration Unit :

2 * GE (RJ45)+4 * 10GE (SFP+)+16 * E1+2 Intermediate Frequency Unit IDU module (-48VDC) including IDU installation accessories

The Huawei 6-42 GHz traditional frequency IP microwave has a maximum of 2 Gbit/s per carrier and 16 Gbit/s per antenna ultra-large transmission capacity, it is the industry's first IP microwave that supports TDM/Hybrid/Packet/ Routing services on the unified platform, satisfying the requirements of large-capacity IP service transmission and IP-based evolving of traditional PDH/SDH microwave. The solution provides a flexible architecture that can be deployed in split, full-outdoor, or full-indoor scenarios. It features high reliability and end-to-end unified O&M management. It is widely used in broadband wireless transmission in vertical sectors, such as government, broadcasting, oil & gas, education, and electric power.

The OptiX RTN 910A is a product in the OptiX RTN 900 radio transmission system series:

• 1.1 Network Application
  The OptiX RTN 900 is a new generation TDM/Hybrid/Packet integrated microwave transmission system developed by Huawei. It provides a seamless microwave transmission solution for mobile communication network or private networks.
• 1.2 Components
  The OptiX RTN 910A adopts a split structure. The system consists of the IDU 910A and the ODU. Each ODU is connected to the IDU 910A through an IF cable.
• 1.3 Configuration Modes
  The OptiX RTN 910A supports different configuration modes in which different system control, switching, and timing boards, IF boards, and ODUs are configured, suited for various microwave application scenarios.

Features of the IDU 910A:

Item	Description
Chassis height	1 U
Pluggable	Supported (CSHR boards are not pluggable.)
The maximum number of radio directions	6
RF configuration mode	N+0 non-protection configuration Nx(1+0) non-protection configuration 1+1 protection configuration N+1 protection configuration XPIC configuration
Service interface type	Native E1 interface Smart E1 interface STM-1 optical/electrical interface FE optical/electrical interface GE optical/electrical interface 2.5GE optical interface

Technical Specification

1.OptiX RTN 900 product family

2.OptiX RTN 910A

Network layer	Suitable for: access layer and aggregation layer
Frequency band	6 ~ 42 GHz
Channel spacing	3.5/ 7/14/28/40/56/112 MHz
Bandwidth	Determine based on ODU bandwidth
Modulation mode	QPSK Strong,QPSK,16QAM Strong,16QAM,32QAM, 64QAM,128QAM, 256QAM,512QAM,512QAM Light, 1024QAM,1024QAM Light,2048QAM, 4096QAM
Maximum number of RFUs	Based on the RTN910A technical specifications
RF direction	6
Air port capacity	Single carrier 1166~2500 Mbit/s (non XPIC)
Exchange capacity	90 Gbit/s (using CSHOF), 10 Gbit/s (using CSHO)
TDM crossover capacity	8×8 VC-4
Link aggregation	2-4
Interface type	E1,T1,STM-1(e/o),FE(e/o),GE(e/o), 2.5GE(o) ,10GE(o)
Transmit power @QPSK	Based on the RTN910A technical specifications
Super dual frequency	Based on the RTN910A technical specifications
L3 VPN	Based on the RTN910A technical specifications
eCPRI support	Based on the RTN910A technical specifications
Rf configuration mode	N+0 N×(1+0) 1+1 N+1 XPIC 2 × 2 CA 4 ×4 MIMO
Feature	Ethernet II, IEEE 802.3 and IEEE 802.1q/p field addition/deletion, and VLAN label exchange (IEEE 802.1q/p) ISIS, OSPF, BGP, RSVP, LDP Support for flow control (IEEE 802.3x) Support Link Aggregation Group (IEEE 802.3ad LAG and L1 LAG) RMON (IETF RFC 2819)
Business type	Native ETH service: E-Line dedicated line service and E-LAN private network service PW based Native ETH services: E-Line dedicated line services, Ethernet aggregation services, E-LAN private network services (VPLS, representing virtual private network services) L3VPN, L2VPN (VLL), CES, MCE
Key characteristics	CES E1, IEEE 1588v2, USB start, H-QoS, PLA/EPLA/EPLA+, AES-256 encryption, device anti-theft, 1+1, N+1, XPIC, AM, TDM, PWE3/MPLS, SDB, L3VPN, CA, MIMO
Antenna	Parabolic antenna: 0.3m~3.7m
IDU Weight	5.4 kg(1+0) 6.2 kg(1+1)
IDU Specification	442mm×220mm×44mm
Environment	Temperature: IDU -5 °C ~+60 °C ; ODU -33 °C ~ +55 °C Humidity: IDU 5%~95%; ODU 5%~100%
Power source	-38.4 V~-57.6 V
Certificate	CE,RCM, FCC,IC,ETL,MCMC

 
3.Board

SLJCSHR01	Single board software - SLJ1CSHR-SLJCSHR01- Main control exchange processing board software package - And Flash IMAGE - Burning type	05021TRA
SLJ1CSHR01	Functional module - OptiX RTN 910A-SLJ1CSHR01-16 * E1 (Native TDM)/4 * GE (RJ45)/2 * GE (SFP)/2 * IF IDU module (-48VDC) -910A	02311FCA
SLJCSHR02	Single board software - SLJ1CSHR-SLJCSHR02- Main control switch board software package - NorFlash - Burning type	05021SSY
SLJCSHR03	Single board software - SLJ1CSHR-SLJCSHR03- Main control switch board logic software - CPLD - loading type	05021SXT
SLJCSHR12	Single board software - SLJ1CSHR-SLJCSHR12- Main control switch board logic software - FPGA - loading type	05021UAM
SLJCSHR10	Single board software - SLJ1CSHR-SLJCSHR10- Main control switch board logic software - FPGA - loading type	05021UAL
SLJ1CSHRF	Produced board - OptiX RTN 910A-SLJ1CSHRF-2 * GE (RJ45)+4 * 10GE (SFP+)+16 * E1+2 intermediate frequency unit single board	03025DJV
SLJCSHRFA02	Single board software - SLJ1CSHRFA-SLJCSHRFA02- Main control integrated intermediate frequency unit board software package - NandFlash burning type	05022ULC
SLJCSHRFA01	Single board software - SLJ1CSHRFB-SLJCSHRFB01- Main control integrated intermediate frequency unit board software package - SPI NorFlash - Burning type	05024ANY

 

Product Display

Related Products

Company Profile

Our Advantages

The product is 100% genuine and has sufficient stock in stock;
Price discounts and fast delivery;
After sales service guarantee; Support sample and customization services.

FAQ

Q: Are you a trading company or a manufacturer? Can I use our own logo and label?
A: We are a trading company that provides domestic and international trade services. We also provide OEM/OEM services.

Q: What are the guarantees for product quality?
A: We have professional engineers who test each piece of equipment before shipment to ensure that the shipped products are in good condition.

Q: How did you resolve a defective product when I received it?
A: We have professional personnel to help you solve the problem. If the product is defective, we usually offer you a return, refund, or replacement of the defective product.

Q: What is your payment method and delivery time?
A: We accept credit cards, wire transfers, PayPal, and other payment methods. We also support fast shipping within 72 hours.

Q: What is the MOQ and how long is the warranty period?
A: The minimum order quantity for normal products is 1, and the product warranty period is usually 1 year.