| Customization: | Available |
|---|---|
| Type: | Wireless |
| Network Site: | Intermediate Node Routers |
|
Still deciding? Get samples of US$ 20000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
HUA WEI OptiX PTN 900 series Services Routers
TPRK01CASE00: OptiX PTN 970C Assembly Classis (AC)
The PTN 900 series, with the case-shaped design, are 5G-oriented access-layer products that meet the GE/10GE/25GE site-to-site requirements. The series supports 50GE/100GE large-capacity ports to meet 5G ultra-broadband bearer requirements and low-speed service ports such as E1/STM-1 ports to access government and enterprise integrated services. The product supports SPN 5G bearer features, such as SR-TP, FlexE, and iFIT.
Developed by Hua wei, the OptiX PTN 970C is a new generation metropolitan optical transport platform that transmits packets. The OptiX PTN 970C is applied at the access and aggregation layers of a metropolitan transport network. The OptiX PTN 970C is used to build various bearer networks for mobile communication, and enterprises.
The OptiX PTN 970C device uses the following techniques to implement carrier-class service transmission and combines advantages of packet and SDH transport networks:
★Pseudo wire emulation edge-to-edge (PWE3) that provides connection-oriented transmission
★Multiprotocol Label Switching (MPLS) that has been optimized for telecommunication bearer networks
★Mature operation, administration and maintenance (OAM)
★Protection switching mechanismsNetworking Application
The OptiX PTN 970 is primarily used at the access or aggregation layers of a metropolitan transport network. It transports packet services on the network and converges them to an IP/MPLS backbone network.
| Item | Specification |
|---|---|
| Cabinet installation standards | ETSI 21 inches, IEC 19 inches |
| Dimensions without packaging (H x W x D) [mm(in.)] | 88.9 mm x 442 mm x 220 mm (3.50 in. x 17.40 in. x 8.66 in.) |
| Dimensions with packaging (H x W x D) [mm(in.)] | 335 mm x 585 mm x 390 mm (13.19 in. x 23.03 in. x 15.35 in) |
| Chassis height [U] | 2U |
| Weight without packaging [kg(lb)] | 3 kg (6.61 lb) |
| Weight without packaging (full configuration) [kg(lb)] | 11.0 kg(24.26 lb) |
| Typical power consumption (with configuration) [W] |
190G Typical configuration I: 2*50GE(1*50GE,2pcs)+2*25GE(2*25GE,1pcs)+10*GE(o)(10*GE,1pcs) Typical power consumption: 222.80 W |
| Typical heat dissipation (with configuration) [BTU/hour] |
190G Typical configuration I: 2*50GE(1*50GE,2pcs)+2*25GE(2*25GE,1pcs)+10*GE(o)(10*GE,1pcs) Heat dissipation:710.05BTU/hour |
| MTBF [year] | 40 year |
| MTTR [hour] | 2 hour |
| Availability | 0.99999 |
| Power supply mode | AC |
| Rated input voltage [V] | 200 V-240 V/100 V-127 V dual-live wire, supporting 240 V HVDC |
| Input voltage range [V] | 90 V to 290 V |
| Maximum input current [A] | 10 A |
| Rated output power [W] | 1200 W |
| Maximum input cable size [mm²] | Standard C13 cable |
| Front-end circuit breaker/fuse [A] | ≥10 A |
| Heat dissipation mode | Air cooling |
| Airflow direction | From left to right |
| Noise at normal temperature (acoustic power) [dB(A)] | 55dBA@normal temperature |
| Number of slots | 9 |
| Number of service board slots | 4 |
| Switching capacity |
TPR1CXPA: 190G bit/s TPR1CXPB: 190G bit/s |
| Maximum number of 100GE ports | 0 |
| Maximum number of 50GE ports | 2 |
| Maximum number of 40GE ports | 0 |
| Maximum number of 25GE ports | 2 |
| Maximum number of 10GE ports | 14 |
| Maximum number of GE ports | 40 |
| Maximum number of FE ports | 40 |
| Maximum number of electrical ports | 32 |
| Redundant CXPs | 1+1 |
| Redundant power supply | 1+1 |
| Redundant fans | The device can run at the temperature of 40˚C in the short term after a single fan fails. |
| Long-term operating temperature [°C(°F)] | -20°C to 60°C(-4.0°F to 140.0°F) |
| Restriction on the operating temperature variation rate [°C(°F)] | ≤ 0.5°C/min (32.9°F/min), non-condensing |
| Storage temperature [°C(°F)] | -40°C to +70°C (-40°F to +158 °F) |
| Long-term operating relative humidity [RH] | 10% RH to 90% RH, non-condensing |
| Storage relative humidity [RH] | 10% RH to 100% RH, non-condensing |
| Long-term operating altitude [m(ft.)] | ≤ 4000 m (13123.2 ft.) (For the altitude in the range of 1800 m to 4000 m [5905.44 ft. to 13123.2 ft.], the operating temperature of the device must decrease by 1°C [1.8°F] for every 220 m [721.78 ft.].) |
| Storage altitude [m(ft.)] | < 5000 m(< 16404.2 ft.) |
| Description | Model |
|---|---|
| OptiX PTN 970C Assembly Classis (DC) | TPRK00CASE00 |
| OptiX PTN 970C Assembly Classis (AC) | TPRK01CASE00 |
| PTN 970C Integrated chassis | TPRK03CASE00 |
The product is 100% genuine and has sufficient stock in stock;
Price discounts and fast delivery;
After sales service guarantee; Support sample and customization services.
Q: Are you a trading company or a manufacturer? Can I use our own logo and label?
A: We are a trading company that provides domestic and international trade services. We also provide OEM/OEM services.
Q: What are the guarantees for product quality?
A: We have professional engineers who test each piece of equipment before shipment to ensure that the shipped products are in good condition.
Q: How did you resolve a defective product when I received it?
A: We have professional personnel to help you solve the problem. If the product is defective, we usually offer you a return, refund, or replacement of the defective product.
Q: What is your payment method and delivery time?
A: We accept credit cards, wire transfers, PayPal, and other payment methods. We also support fast shipping within 72 hours.
Q: What is the MOQ and how long is the warranty period?
A: The minimum order quantity for normal products is 1, and the product warranty period is usually 1 year.
){kind=link}