Customization: | Available |
---|---|
Type: | Optical Transport Network |
Certification: | CE, ISO, RoHS, GS |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Item | Specifications | |
Dimensions (W x D x H) | 442 mm x 220 mm x 88.1 mm (excluding mounting ears) | |
Weight (empty chassis) | 4.9 kg | |
Installation mode | 19-inch cabinet | |
ETSI 300 mm cabinet, such as A63B, N63B, and N63E | ||
Number of slots for service boards | DC chassis: 6 | |
AC chassis: 4 | ||
Optical switching capability | 1- to 9-degree ROADM | |
OTN cross-connect capacity | 800 Gbit/s | |
OSU cross-connect capacity | 800 Gbit/s | |
SDH cross-connect capacity | K2UXCL: 40 Gbit/s VC-4, 5 Gbit/s VC-3/VC-12 | |
K2UXCLE: 60 Gbit/s VC-4, 10 Gbit/s VC-3/VC-12 | ||
Packet switching capacity | 400 Gbit/s | |
Maximum number of wavelengths | DWDM | 96 wavelengths |
CWDM | 8 wavelengths | |
Center wavelength range | DWDM: 1529.16 nm to 1567.13 nm (extended C band, ITU-T G.694.1) | |
CWDM: 1471 nm to 1611 nm (S+C+L band, ITU-T G.694.2) | ||
Supported service type | SDH/SONET, PDH, OTN, OSU, Ethernet, PCM, CPRI, SAN, video, and other services | |
Maximum single-channel rate | 400 Gbit/s | |
Line rate | 1.25 Gbit/s, 2.5 Gbit/s, 10 Gbit/s, 25 Gbit/s, 100 Gbit/s, 200 Gbit/s, 400 Gbit/s | |
Pluggable optical/electrical module | Optical module: SFP/eSFP, XFP, SFP+, QSFP+, TXFP, CFP, CFP2, QSFP28 | |
Electrical module: GE SFP | ||
Topology | Point-to-point, chain, star, ring, ring with chain, intersecting ring, tangent ring | |
Network-level protection (OTN) | Client 1+1 protection, intra-board 1+1 protection, ODUk SNCP, optical line protection, tributary SNCP, LPT, OSUflex SNCP | |
Network-level protection (packet) | Tunnel APS, PW APS/FPS, LPT, LAG, ERPS, packet SNCP, MRPS | |
Network-level protection (TDM) | SDH protection: SNCP, linear MSP, ring MSP, TPS protection, E1 SNCP, 64K SNCP, hitless protection switching | |
EoS protection: LAG, DLAG, LCAS, LPT, STP/RSTP | ||
Device-level protection | Cross-connect, system control, and clock integrated board redundancy | |
Power supply backup | ||
Fan redundancy | ||
Encryption type | Client-side bidirectional service encryption | |
TSDN | E2E fast service provisioning | |
Bandwidth on demand (BoD) | ||
Scheduled service provisioning (BC) | ||
Visualized resource utilization | ||
Latency map | ||
Optical power management | ALS, AGC, OPA, IPA | |
Maintenance | MPLS-TP OAM | |
ETH OAM | ||
Port mirroring (EoS) | ||
Port traffic mirroring (packet) | ||
Loopback | ||
PRBS | ||
LLDP | ||
Easy O&M | Optical Doctor (OD) system, Fiber Doctor (FD) system | |
Synchronization | Physical clock (OTN & packet & SDH) | |
IEEE 1588v2 (OTN & packet) | ||
ITU-T G.8275.1/G.8273.2 (OTN & packet) | ||
Standard working voltage | DC power supply | |
Standard operating voltage: -48 V to -60 V | ||
Operating voltage range: -40 V to -72 V | ||
AC power supply | ||
Standard operating voltage: 100 V to 240 V | ||
Operating voltage range: 90 V to 264 V | ||
Device running environment | Chassis temperature | Long term: -5°C to +50°C |
Short terma: -10°C to +55°C | ||
Chassis relative humidity | Long term: 5% to 85% | |
Short term: 5% to 95% | ||
ETSI standard | ETSI Class 3.1 | |
NOTE: | ||
The ETSI standards define the temperature and humidity of the equipment room. | ||
Reliability | Mean time to repair (MTTR) | 1 hourb |
NOTE: | ||
The MTTR is related to the specific configuration of a device, including the average time for locating a fixed fault on site, replacing a board, restarting the device, and recovering services. The traveling time is not included. | ||
Mean time between failures (MTBF) | 44.68 yearsb | |
Availability | 99.9997445%b | |
a: "Short term" refers to a maximum of 96 consecutive operating hours and a total operating time of no more than 15 days in a year. | ||
b: The preceding parameter values are calculated based on the typical product configuration. The parameters vary according to the configuration module. |
The product is 100% genuine and has sufficient stock in stock;
Price discounts and fast delivery;
After sales service guarantee; Support sample and customization services.
Q: Are you a trading company or a manufacturer? Can I use our own logo and label?
A: We are a trading company that provides domestic and international trade services. We also provide OEM/OEM services.
Q: What are the guarantees for product quality?
A: We have professional engineers who test each piece of equipment before shipment to ensure that the shipped products are in good condition.
Q: How did you resolve a defective product when I received it?
A: We have professional personnel to help you solve the problem. If the product is defective, we usually offer you a return, refund, or replacement of the defective product.
Q: What is your payment method and delivery time?
A: We accept credit cards, wire transfers, PayPal, and other payment methods. We also support fast shipping within 72 hours.
Q: What is the MOQ and how long is the warranty period?
A: The minimum order quantity for normal products is 1, and the product warranty period is usually 1 year.