Optixstar C810 E AC DC Otn CPE Optical Transmission Network C810e Osn

Product Description

Product Description

OptiXstar C810 E

OptiXstar C810 E is a fixed case-shaped OTN CPE that excels in CPE tail-end access scenarios. It offers reliable and premium OTN private line solutions for governments and enterprises, catering to diverse scenarios such as campuses, business buildings, and offices.
OptiXstar C810 E is a half-width device that can achieve a maximum line rate of 2.5 Gbit/s. It supports E1, FE/GE, and STM-1/STM-4 multi-service access, making it a cost-effective solution for small-granularity premium private line scenarios. This device is mainly used for private line access in government and enterprise branches.

Technical Specification

Item		Specification
Dimensions (H x W x D)		44 mm x 320 mm x 220 mm
Weight		About 2.2 kg
Typical power consumption		30 W
Maximum power consumption		42 W
Circuit breaker		6 A
Standard working voltage		AC: 100 V to 240 V
		DC: -48 V to -60 V
Power supply protection		External power modules can be used for power backup.
		Input voltage of the external power module:
		AC: 100 V to 240 V
		DC: -48 V to -60 V
		Output voltage of the external power module: 12 V (DC)
Installation mode		Installed on a desk
		Mounted on a wall
		Installed in a cabinet
Client-side capability		E1-1 to E1-4: 4 x E1
		FE/GE combo 5-8: 4 x GE/FE (optical/electrical port)
		FE/GE/SDH 9-12: 4 x GE/FE/STM-1/STM-4 (optical port)
Line-side capability		2 x OTU1/OTU0 or 2 x STM-16/STM-4/STM-1
Maximum upstream bandwidth		2 x 2.5 Gbit/s
Service mapping path		Service mapping path of the E1 port:
		E1 <-> STM-16/STM-4/STM-1
		E1 <-> STM-4/STM-16 <-> ODU0/ODU1 <-> OTU0/OTU1
		Service mapping path of the FE/GE combo 5-8 port:
		ETH <-> ODU0/ODU1 <-> OTU0/OTU1
		ETH <-> OSUflex <-> ODU0/ODU1 <-> OTU0/OTU1
		ETH <-> STM-4/STM-16 <-> ODU0/ODU1 <-> OTU0/OTU1
		ETH <-> STM-16/STM-4/STM-1
		Service mapping path of the FE/GE/SDH 9-12 port:
		FE/GE/STM-1/STM-4 <-> ODU0 <-> OTU1/OTU0
		STM-1/STM-4 <-> STM-16/STM-4/STM-1
		STM-1/STM-4 <-> STM-4/STM-16 <-> ODU0/ODU1 <-> OTU0/OTU1
		ETH <-> ODU0/ODU1 <-> OTU0/OTU1
		ETH <-> OSUflex <-> ODU0/ODU1 <-> OTU0/OTU1
		ETH <-> STM-4/STM-16 <-> ODU0/ODU1 <-> OTU0/OTU1
		ETH <-> STM-16/STM-4/STM-1
Service cross-connect capacity	OTN	10G
		NOTE:
		The service cross-connect capacity is shared by ODUk and OSUflex.
	SDH	12.5G for higher-order cross-connections and 5G for lower-order cross-connections
	Packet	8G
OTN functions	OSU	Supported
	Protection type	ODUk SNCP and OSUflex SNCP
	Physical clock	Supported
		NOTE:
		The VP port of an FE/STM-1/STM-4 port cannot be used as the clock source.
	OTN performance monitoring	Supported
	Delay measurement	Supported
	ALS	Supported only by client trails.
	Meter-free test	Supported
Packet functions	QoS	Ingress DS mapping and rate limitation on client-side ports
	Ethernet OAM	Supported (CC/LB/LT/LM/DM)
	MPLS-TP OAM	Not supported
	Delay measurement	Supported
	Protection type	LAG
	E-Line service	EPL/EVPL, including QinQ private line
SDH functions	Protection type	VC-4 SNCP, VC-3 SNCP, VC-12 SNCP, and 1+1 linear MSP
	Physical clock	Supported
	E1 retiming	LIU retiming
	PRBS	Supported
		NOTE:
		If VC-4 cross-connections are configured, deactivate the cross-connections before performing a PRBS test.
	Overhead processing	For E1 services, VC-12 path overheads can be processed, such as J2 and V5 bytes.
		For SDH services, section overheads and higher-order path overheads of STM-1 signals can be processed, and J0, J1, and C2 bytes can be set and queried.
EoS functions	EoS capacity	5G
	VCTRUNK specifications	Quantity: 8
		Each VCTRUNK can be bound to a maximum of 8 x VC-4s, 24 x VC-3s, or 63 x VC-12s.
		An NE supports a maximum of 32 x VC-4s, 48 x VC-3s, or 504 x VC-12s.
	Protection type	LCAS and LAG
	QoS	VCTRUNK shaping
	E-Line service	EPL/EVPL, including QinQ private line
Port MTU		64 bytes to 9600 bytes. The default value is 9600 bytes.
Port loopback		Supported
DCN		Outband DCN
Power-off notice		Supported
NCE Controller		Automatic rollout
		Automatic service provisioning
		CPE plug-and-play
		BoD
		Delay measurement
		Latency map
Device operating temperature		-25°C to +65°C
		NOTE:
Device operating humidity		Long term: 5% to 85%
		Short term: 5% to 95%
		NOTE:
Mean time to repair (MTTR)		1 houra
Mean time between failures (MTBF)		AC: 90.18 yearsa
		DC: 90.15 yearsa

Product Display

Related Products

Company Profile

Our Advantages

The product is 100% genuine and has sufficient stock in stock;
Price discounts and fast delivery;
After sales service guarantee; Support sample and customization services.

FAQ

Q: Are you a trading company or a manufacturer? Can I use our own logo and label?
A: We are a trading company that provides domestic and international trade services. We also provide OEM/OEM services.

Q: What are the guarantees for product quality?
A: We have professional engineers who test each piece of equipment before shipment to ensure that the shipped products are in good condition.

Q: How did you resolve a defective product when I received it?
A: We have professional personnel to help you solve the problem. If the product is defective, we usually offer you a return, refund, or replacement of the defective product.

Q: What is your payment method and delivery time?
A: We accept credit cards, wire transfers, PayPal, and other payment methods. We also support fast shipping within 72 hours.

Q: What is the MOQ and how long is the warranty period?
A: The minimum order quantity for normal products is 1, and the product warranty period is usually 1 year.